Info@GWDMV.com 571-370-8500 Monday-Friday: 8AM-8PM
Saturday: 10AM-2PM
21620 Ridgetop Circle,
Suite 190, Sterling VA 20166

Protection

Protection

Paint protection film dates back to the Vietnam war. Helicopter blades and other sensitive to areas were often damaged by flying debris and
shrapnel during takeoff and landing. This damage posed a massive problem for the United States military, so they asked vendors to develop
a solution that was both lightweight and transparent. They came up with a clear film that could resist both rock chips and abrasions. Fast forward to today, we use modern films to protect your vehicle from the road and environmental debris in the same manner.

  • Piece of mind knowing you’re protected
  • Protection from rock chips and debris
  • Resist permanent staining because of bird
  • Enhances the resale value of your vehicle

WHY STEK?

In our search for the ultimate paint protection film, we have tested almost every product the industry has to offer — each with varying results. In 2018 we discovered STEK films. We were amazed at the durability and ease of installation, but more importantly, the orange peel effect is much less visible than the other leading films from competing manufacturers. These properties make STEK DYNOshield perfect for our clients at GlasWerks.

Maximum protection

Whole Vehicle Coverage

Mirrors

A-Pillars

1 Day + Overnight Cure

Moderate protection Drivers package

Full Front End Coverage

Mirrors

A-Pillars

1 Day + Overnight Cure

Basic protection for the daily driver

The daily driver plan protects the areas of your care most commonly damaged in regular commuting. The entire front clip is wrapped in Stek DYNOshield. We know you need the protection, but don’t want to see it. Our methods go beyond industry-standard templates to cover areas normally left exposed.

  • Full front end
  • Mirrors
  • A-Pillars

1 Day + Overnight Cure

PPF FILMS

  • STEK DYNOshield

    Incredible gloss levels, the hydrophobic topcoat negates having to ceramic coat the film. It's stain-resistant and self-healing with the introduction of hot water or sunlight. Comes with a 10-year warranty protecting against yellowing, delamination, bubbling and cracking

  • STEK DYNOMATT

    A Satin finish film. The hydrophobic topcoat negates having to ceramic coat the film. It's stain-resistant and self-healing with the introduction of hot water or sunlight. Comes with a 7-year warranty protecting against yellowing, delamination, bubbling and cracking

Fashion films by STEK

Fashion films allow you the freedom to change the appearance of your vehicle or perform accent work all while maintaining the layer of protection synonymous with STEK Paint protection film. The majority of these films also have the same self-healing and hydrophobic properties as our primary offerings from STEK.

  • (DYNOprism)

    It provides a beautiful multi-color prismatic shift as light moves around it. The same effect was once only available through custom paint jobs that started at 10K.

  • (DYNOcarbon)

    It creates a color matching carbon fiber pattern over any painted surface, both gloss or matte.

  • (DYNOshades)

    Film designed with automotive lighting in mind provides the ultimate tinted clarity.

  • (DYNOblack)

    Ever seen a gloss black vinyl wrap on a roof? It looks terrible with insane orange peel levels and little to no reflection. With DYNOblack we can achieve the same deep gloss black mirror look that until now has only been available to those choosing costly permanent paintwork.

  • Q

    What is a Ceramic coating?

    A

    Ceramic coatings are not sealants, waxes, or polishes. They are highly advanced products that rely on primarily Quartz or Silicon to provide their hardness, durability, stain resistance, hydrophobicity. These coatings typically last years as opposed to waxes and sealants that last months.

  • Q

    Why Gyeon coatings?

    A

    After years of being disappointed in the performance of various ceramic coatings, we discovered GYEON. They don’t resort to silly marketing gimmicks or false promises. We found this refreshing as every other manufacturer in the industry pushed forever (warranties), displaying gimmicky images of hockey players clearly photoshopped onto the roofs of exotic cars. Honesty surrounding the capabilities of their product line and a great support structure for their Authorized Installers makes GYEON our go-to manufacturer for Ceramic Coatings as well as many other care products. Gyeon stands behind their products in a way manufactures rarely do.

    All Gyeon Exterior coatings except for Q2 Fabric are safe for Carbon Fiber application.

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 Mohs+ is a unique 2-stage coating system that provides both extreme scratch resistance and self-cleaning properties. With a pure Silazane base coat, it is the hardest automotive coating ever developed. The topcoat prevents watermarks and stains and prolongs the total durability of the Q2 Base coating. The result cannot be overestimated – using safe maintenance procedures paint correction may be avoided throughout the lifetime of the product.

  • Extreme scratch resistance
  • Extreme resistance to staining and water spotting
  • Crisp clear gloss
  • The original
  • 5-year warranty

Q2 DuraFlex is an advanced, two-ingredient, and double-layer ceramic coating. The pure silazane Q2 Base coating is the hardest automotive coating ever developed. It is a technological breakthrough and requires only one layer. Q2 Flexi is a thick and extremely slick topcoat that has set new standards in gloss, hydrophobicity, and durable self-cleaning.

  • Most hydrophobicity of any coating.
  • Superslick wax-like topcoat
  • 5-year warranty

DuraBead is an advanced, two-ingredient, and multi-layer ceramic coating. You are using multiple layers of Q2 Mohs as the base coat topped with an extremely hydrophobic, fluorine-based top coat Q2 Bead results in industry-leading hydrophobicity, self-cleaning, and unrivaled durability.

  • Highest self-cleaning properties
  • Displays water beading characteristics similar to high-end legacy wax’s
  • 5-year warranty

GlasWerks Certified detailer coating offerings are baked into your vehicle’s paintwork with short wave IR bake lights.

Installation takes an additional 2 days for Certified coatings.

At a minimum Level 4 detailing must be completed before the application of any Certified detailer GYEON coatings

Professional level Coatings from GlasWerks and Gyeon

Q2 Syncro is the most advanced widely available coating offered by Gyeon. Its multilayer application ends with the application of Q2 Skin, an advanced silicone-based topcoat that provides exceptional slickness and unrivaled hydrophobicity.

  • Superslick, Superhydrophobic, super glossy

Q2 MOHS makes the paintwork extremely resistant to scratches. The extraordinary hardness and structural integrity of the coating preserve the effects achieved during the paint correction and are synonymous with much slower paint degradation during daily maintenance routine.

  • Dependable, long-lasting, durable Coating

Unique quartz coating for matte paint. Only one layer is required. It is extremely hydrophobic and designed for maximum durability on matte finish automotive paint. Prevents discoloration and oxidation, protects against strong chemicals, road salt, and UV rays. Q2 Matte can also be applied over Satin or Matte-finished Vinyl wraps.

  • For Matte Paintwork

Q2 Pure brings the appearance of the paintwork to a new level, delivering pure candy gloss. Its thick formulation requires only one Layer.

  • Highest candy gloss levels of the professional line

Add an additional day for professional coating installations.

At a minimum Level 3 detailing must be completed before the application of any professional level GYEON coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Surviving on the most intensely used windscreen for up to 12 months, at the same time ensuring an undiminished water repellency. Q2 View repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.

  • Improved visibility in inclement weather
  • Provides increased resistance to water spotting
  • Reduce wiper usage

1-3hrs

Q2 Trim has a formula that allows it to be applied on different vehicle parts: on plastics with their structure, on unpainted parts, on so-called piano black finishes, which are most problematic to maintain, on the tail- and headlight covers after having them restored. Its pure SiO2 base. It does not leave an oily layer on the trim’s surface but strongly bonds with its structure, leaving a thick coat. Q2 Trim provides a strong, long-lasting restoration effect.

  • Restorative effect for discolored/faded/oxidized black plastic trim
  • Prevents new plastics from lightening due to sun damage or natural oxidation.
  • UV protectant to prevent further oxidation

Contact us for a quote.

There are various wheel rim types available on the market, e.g., wet painted, powder-coated, anodized, or polished. Q2 Rim is an appropriate product to protect every one of them. Even the owners of models with polished rim lips have observed that the need to refresh the so-called mirror effect is significantly less frequent. Wheels, just after the engine bay and exhausts, are the components most exposed to high temperatures. Q2 Rim has an endurance capability exceeding 1400F without any damage to its original properties. The fact that this quartz coating is dedicated exclusively to rims is an asset and introduces a new level of quality within the field of rim protection.

  • Reduced cleaning needed
  • Brake dust both standard Iron and Carbon ceramic resistant
  • Withstands 1400F temperatures with no effect on longevity

Wheels off coating service-we remove, decontaminate, polish if needed your wheels before installing two layers of Gyeon RIM ensuring less work to keep them clean. Additionally, for factory satin black wheels such as Porsche GT cars, this coating greatly reduces the stainability of these finishes. While we have your wheel removed, we also coat Brake calipers and Rotor hats where applicable.

4/hrs

The first fully functional textile protectant containing SiO2.
Q2 Fabric Coat helps keep these surfaces cleaner for longer and also makes them much easier to clean. This coating is superhydrophobic, ‘throwing’ water and liquids off fabric and textiles–even for fabric convertible roofs, a high-pressure rinse once a month can be enough to keep the fabric clean and looking great.

This is typically done after a detailing session, but before the commencement of any Paint correction/Texture leveling/PPF as the entire car gets masked off to ensure this coating doesn’t go anywhere, we don’t want it to go.

 

1-2 days

Gyeon Auxiliary Interior Ceramic coatings

Highly advanced ceramic coating for all types of leather upholstery. Advanced quartz coating specially formulated for automotive leather. Q2 Leather Shield is suitable for every type of leather produced to date and does not change the finish of your upholstery. Repels dirt and prevents discoloration, protects against liquids, and UV rays. It provides superb protection against dirt, UV rays, and the rigors of everyday usage. Q2 Leather Shield makes the daily maintenance easy and safe even on delicate upholsteries.

  • Recommended for new leather surfaces
  • Maximum resistance to staining for light-colored leathers
  • Minimizes maintenance required for leather surfaces
  • Most Hydrophobic coating available for leather surfaces
  • 18-month protection

 

At a minimum Level 3 interior detailing must be completed before the application of GYEON
Q2 Leather shield on anything but new vehicles.

Versatile automotive leather protectant. A resin-based formula may be used on all types of automotive leather and presents the right solution on older, worn-out upholsteries, where the use of Q2 Leather Shield is not recommended. With a durability of up to 3 months, effective protection and dirt repellency exceeds standards set by any regular leather conditioner, protecting the surface from liquids, sweat, dirt or “dye transfer” from clothing.

  • 3 months of protection
  • Helps repel blue jean dye transfer
  • Safe for older worn leathers

 

At a minimum Level 2 interior detailing must be completed before the application of GYEON Q2 Leather coat on anything but new vehicles.

  • Q

    What is a Ceramic coating?

    A

    Ceramic coatings are not sealants, waxes, or polishes. They are highly advanced products that rely on primarily Quartz or Silicon to provide their hardness, durability, stain resistance, hydrophobicity. These coatings typically last years as opposed to waxes and sealants that last months.

  • Q

    Why Gyeon coatings?

    A

    After years of being disappointed in the performance of various ceramic coatings, we discovered GYEON. They don’t resort to silly marketing gimmicks or false promises. We found this refreshing as every other manufacturer in the industry pushed forever (warranties), displaying gimmicky images of hockey players clearly photoshopped onto the roofs of exotic cars. Honesty surrounding the capabilities of their product line and a great support structure for their Authorized Installers makes GYEON our go-to manufacturer for Ceramic Coatings as well as many other care products. Gyeon stands behind their products in a way manufactures rarely do.

    All Gyeon Exterior coatings except for Q2 Fabric are safe for Carbon Fiber application.

Exterior Coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 MOHS+

Q2 Mohs+ is a unique 2-stage coating system that provides both extreme scratch resistance and self-cleaning properties. With a pure Silazane base coat, it is the hardest automotive coating ever developed. The topcoat prevents watermarks and stains and prolongs the total durability of the Q2 Base coating. The result cannot be overestimated – using safe maintenance procedures paint correction may be avoided throughout the lifetime of the product.

  • Extreme scratch resistance
  • Extreme resistance to staining and water spotting
  • Crisp clear gloss
  • The original
  • 5-year warranty

Q2 Duraflex

Q2 DuraFlex is an advanced, two-ingredient, and double-layer ceramic coating. The pure silazane Q2 Base coating is the hardest automotive coating ever developed. It is a technological breakthrough and requires only one layer. Q2 Flexi is a thick and extremely slick topcoat that has set new standards in gloss, hydrophobicity, and durable self-cleaning.

  • Most hydrophobicity of any coating.
  • Superslick wax-like topcoat
  • 5-year warranty

DuraBead Q2

DuraBead is an advanced, two-ingredient, and multi-layer ceramic coating. You are using multiple layers of Q2 Mohs as the base coat topped with an extremely hydrophobic, fluorine-based top coat Q2 Bead results in industry-leading hydrophobicity, self-cleaning, and unrivaled durability.

  • Highest self-cleaning properties
  • Displays water beading characteristics similar to high-end legacy wax’s
  • 5-year warranty

GlasWerks Certified detailer coating offerings are baked into your vehicle’s paintwork with short wave IR bake lights.

Installation takes an additional 2 days for Certified coatings.

At a minimum Level 4 detailing must be completed before the application of any Certified detailer GYEON coatings

Professional level Coatings from GlasWerks and Gyeon

Q2 SYNCRO

Q2 Syncro is the most advanced widely available coating offered by Gyeon. Its multilayer application ends with the application of Q2 Skin, an advanced silicone-based topcoat that provides exceptional slickness and unrivaled hydrophobicity.

  • Superslick, Superhydrophobic, super glossy

Q2 MOHS

Q2 MOHS makes the paintwork extremely resistant to scratches. The extraordinary hardness and structural integrity of the coating preserve the effects achieved during the paint correction and are synonymous with much slower paint degradation during daily maintenance routine.

  • Dependable, long-lasting, durable Coating

Q2 MATTE

Unique quartz coating for matte paint. Only one layer is required. It is extremely hydrophobic and designed for maximum durability on matte finish automotive paint. Prevents discoloration and oxidation, protects against strong chemicals, road salt, and UV rays. Q2 Matte can also be applied over Satin or Matte-finished Vinyl wraps.

  • For Matte Paintwork

Q2 PURE

Q2 Pure brings the appearance of the paintwork to a new level, delivering pure candy gloss. Its thick formulation requires only one Layer.

  • Highest candy gloss levels of the professional line

Add an additional day for professional coating installations.

At a minimum Level 3 detailing must be completed before the application of any professional level GYEON coatings

Exterior Auxiliary Coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 VIEW-GLASS

Surviving on the most intensely used windscreen for up to 12 months, at the same time ensuring an undiminished water repellency. Q2 View repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.

  • Improved visibility in inclement weather
  • Provides increased resistance to water spotting
  • Reduce wiper usage

1-3hrs

Q2 TRIM-Black plastic trim/grills/plastic wheel liners

Q2 Trim has a formula that allows it to be applied on different vehicle parts: on plastics with their structure, on unpainted parts, on so-called piano black finishes, which are most problematic to maintain, on the tail- and headlight covers after having them restored. Its pure SiO2 base. It does not leave an oily layer on the trim’s surface but strongly bonds with its structure, leaving a thick coat. Q2 Trim provides a strong, long-lasting restoration effect.

  • Restorative effect for discolored/faded/oxidized black plastic trim
  • Prevents new plastics from lightening due to sun damage or natural oxidation.
  • UV protectant to prevent further oxidation

Contact us for a quote.

Q2 RIM-Wheels & High temp surfaces

There are various wheel rim types available on the market, e.g., wet painted, powder-coated, anodized, or polished. Q2 Rim is an appropriate product to protect every one of them. Even the owners of models with polished rim lips have observed that the need to refresh the so-called mirror effect is significantly less frequent. Wheels, just after the engine bay and exhausts, are the components most exposed to high temperatures. Q2 Rim has an endurance capability exceeding 1400F without any damage to its original properties. The fact that this quartz coating is dedicated exclusively to rims is an asset and introduces a new level of quality within the field of rim protection.

  • Reduced cleaning needed
  • Brake dust both standard Iron and Carbon ceramic resistant
  • Withstands 1400F temperatures with no effect on longevity

Wheels off coating service-we remove, decontaminate, polish if needed your wheels before installing two layers of Gyeon RIM ensuring less work to keep them clean. Additionally, for factory satin black wheels such as Porsche GT cars, this coating greatly reduces the stainability of these finishes. While we have your wheel removed, we also coat Brake calipers and Rotor hats where applicable.

4/hrs

Q2 FABRIC COAT- For fabric convertible or Targa roofs.

The first fully functional textile protectant containing SiO2.
Q2 Fabric Coat helps keep these surfaces cleaner for longer and also makes them much easier to clean. This coating is superhydrophobic, ‘throwing’ water and liquids off fabric and textiles–even for fabric convertible roofs, a high-pressure rinse once a month can be enough to keep the fabric clean and looking great.

This is typically done after a detailing session, but before the commencement of any Paint correction/Texture leveling/PPF as the entire car gets masked off to ensure this coating doesn’t go anywhere, we don’t want it to go.

 

1-2 days

Interior Coatings

Gyeon Auxiliary Interior Ceramic coatings

Q2 Leather shield

Highly advanced ceramic coating for all types of leather upholstery. Advanced quartz coating specially formulated for automotive leather. Q2 Leather Shield is suitable for every type of leather produced to date and does not change the finish of your upholstery. Repels dirt and prevents discoloration, protects against liquids, and UV rays. It provides superb protection against dirt, UV rays, and the rigors of everyday usage. Q2 Leather Shield makes the daily maintenance easy and safe even on delicate upholsteries.

  • Recommended for new leather surfaces
  • Maximum resistance to staining for light-colored leathers
  • Minimizes maintenance required for leather surfaces
  • Most Hydrophobic coating available for leather surfaces
  • 18-month protection

 

At a minimum Level 3 interior detailing must be completed before the application of GYEON
Q2 Leather shield on anything but new vehicles.

Q2 Leather coat

Versatile automotive leather protectant. A resin-based formula may be used on all types of automotive leather and presents the right solution on older, worn-out upholsteries, where the use of Q2 Leather Shield is not recommended. With a durability of up to 3 months, effective protection and dirt repellency exceeds standards set by any regular leather conditioner, protecting the surface from liquids, sweat, dirt or “dye transfer” from clothing.

  • 3 months of protection
  • Helps repel blue jean dye transfer
  • Safe for older worn leathers

 

At a minimum Level 2 interior detailing must be completed before the application of GYEON Q2 Leather coat on anything but new vehicles.

Heat Rejection Film

Recently window tint has seen a transition from a low tech
privacy product to a high technology UV blocking asset protection
product. If you care about your car’s interior and want to remain
cool in the warmer months without having to blast your AC then
the modern films from STEK are a good fit for your lifestyle.

What we offer

At GlasWerks we offer the ACTION series of carbon ceramic window tint films from STEK. Available in shades from 05-80 they all offer the following benefits.

  • Carbon ceramic technology
  • Color stable (never fades or turns purple)
  • 99% UV blockage reducing Infrared heat pass through
  • Zero interference with radio or satellite signals
  • Limited lifetime warranty against fading, delamination, bubbling & cracking

COMING SOON

PPF (PAINT PROTECTION FILM)

Paint protection film dates back to the Vietnam war. Helicopter blades and other sensitive to areas were often damaged by flying debris and
shrapnel during takeoff and landing. This damage posed a massive problem for the United States military, so they asked vendors to develop
a solution that was both lightweight and transparent. They came up with a clear film that could resist both rock chips and abrasions. Fast forward to today, we use modern films to protect your vehicle from the road and environmental debris in the same manner.

  • Piece of mind knowing you’re protected
  • Protection from rock chips and debris
  • Resist permanent staining because of bird
  • Enhances the resale value of your vehicle

WHY STEK?

In our search for the ultimate paint protection film, we have tested almost every product the industry has to offer — each with varying results. In 2018 we discovered STEK films. We were amazed at the durability and ease of installation, but more importantly, the orange peel effect is much less visible than the other leading films from competing manufacturers. These properties make STEK DYNOshield perfect for our clients at GlasWerks.

Maximum protection

Maximum protection

Whole Vehicle Coverage

Mirrors

A-Pillars

1 Day + Overnight Cure

Moderate protection Drivers package

Moderate protection Drivers package

Full Front End Coverage

Mirrors

A-Pillars

1 Day + Overnight Cure

Basic protection for the daily driver

Basic protection for the daily driver

The daily driver plan protects the areas of your care most commonly damaged in regular commuting. The entire front clip is wrapped in Stek DYNOshield. We know you need the protection, but don’t want to see it. Our methods go beyond industry-standard templates to cover areas normally left exposed.

  • Full front end
  • Mirrors
  • A-Pillars

1 Day + Overnight Cure

PPF FILMS

  • STEK DYNOshield

    Incredible gloss levels, the hydrophobic topcoat negates having to ceramic coat the film. It's stain-resistant and self-healing with the introduction of hot water or sunlight. Comes with a 10-year warranty protecting against yellowing, delamination, bubbling and cracking

  • STEK DYNOMATT

    A Satin finish film. The hydrophobic topcoat negates having to ceramic coat the film. It's stain-resistant and self-healing with the introduction of hot water or sunlight. Comes with a 7-year warranty protecting against yellowing, delamination, bubbling and cracking

Fashion films by STEK

Fashion films allow you the freedom to change the appearance of your vehicle or perform accent work all while maintaining the layer of protection synonymous with STEK Paint protection film. The majority of these films also have the same self-healing and hydrophobic properties as our primary offerings from STEK.

  • (DYNOprism)

    It provides a beautiful multi-color prismatic shift as light moves around it. The same effect was once only available through custom paint jobs that started at 10K.

  • (DYNOcarbon)

    It creates a color matching carbon fiber pattern over any painted surface, both gloss or matte.

  • (DYNOshades)

    Film designed with automotive lighting in mind provides the ultimate tinted clarity.

  • (DYNOblack)

    Ever seen a gloss black vinyl wrap on a roof? It looks terrible with insane orange peel levels and little to no reflection. With DYNOblack we can achieve the same deep gloss black mirror look that until now has only been available to those choosing costly permanent paintwork.

GYEON CERAMIC COATINGS

  • Q

    What is a Ceramic coating?

    A

    Ceramic coatings are not sealants, waxes, or polishes. They are highly advanced products that rely on primarily Quartz or Silicon to provide their hardness, durability, stain resistance, hydrophobicity. These coatings typically last years as opposed to waxes and sealants that last months.

  • Q

    Why Gyeon coatings?

    A

    After years of being disappointed in the performance of various ceramic coatings, we discovered GYEON. They don’t resort to silly marketing gimmicks or false promises. We found this refreshing as every other manufacturer in the industry pushed forever (warranties), displaying gimmicky images of hockey players clearly photoshopped onto the roofs of exotic cars. Honesty surrounding the capabilities of their product line and a great support structure for their Authorized Installers makes GYEON our go-to manufacturer for Ceramic Coatings as well as many other care products. Gyeon stands behind their products in a way manufactures rarely do.

    All Gyeon Exterior coatings except for Q2 Fabric are safe for Carbon Fiber application.

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 Mohs+ is a unique 2-stage coating system that provides both extreme scratch resistance and self-cleaning properties. With a pure Silazane base coat, it is the hardest automotive coating ever developed. The topcoat prevents watermarks and stains and prolongs the total durability of the Q2 Base coating. The result cannot be overestimated – using safe maintenance procedures paint correction may be avoided throughout the lifetime of the product.

  • Extreme scratch resistance
  • Extreme resistance to staining and water spotting
  • Crisp clear gloss
  • The original
  • 5-year warranty

Q2 DuraFlex is an advanced, two-ingredient, and double-layer ceramic coating. The pure silazane Q2 Base coating is the hardest automotive coating ever developed. It is a technological breakthrough and requires only one layer. Q2 Flexi is a thick and extremely slick topcoat that has set new standards in gloss, hydrophobicity, and durable self-cleaning.

  • Most hydrophobicity of any coating.
  • Superslick wax-like topcoat
  • 5-year warranty

DuraBead is an advanced, two-ingredient, and multi-layer ceramic coating. You are using multiple layers of Q2 Mohs as the base coat topped with an extremely hydrophobic, fluorine-based top coat Q2 Bead results in industry-leading hydrophobicity, self-cleaning, and unrivaled durability.

  • Highest self-cleaning properties
  • Displays water beading characteristics similar to high-end legacy wax’s
  • 5-year warranty

GlasWerks Certified detailer coating offerings are baked into your vehicle’s paintwork with short wave IR bake lights.

Installation takes an additional 2 days for Certified coatings.

At a minimum Level 4 detailing must be completed before the application of any Certified detailer GYEON coatings

Professional level Coatings from GlasWerks and Gyeon

Q2 Syncro is the most advanced widely available coating offered by Gyeon. Its multilayer application ends with the application of Q2 Skin, an advanced silicone-based topcoat that provides exceptional slickness and unrivaled hydrophobicity.

  • Superslick, Superhydrophobic, super glossy

Q2 MOHS makes the paintwork extremely resistant to scratches. The extraordinary hardness and structural integrity of the coating preserve the effects achieved during the paint correction and are synonymous with much slower paint degradation during daily maintenance routine.

  • Dependable, long-lasting, durable Coating

Unique quartz coating for matte paint. Only one layer is required. It is extremely hydrophobic and designed for maximum durability on matte finish automotive paint. Prevents discoloration and oxidation, protects against strong chemicals, road salt, and UV rays. Q2 Matte can also be applied over Satin or Matte-finished Vinyl wraps.

  • For Matte Paintwork

Q2 Pure brings the appearance of the paintwork to a new level, delivering pure candy gloss. Its thick formulation requires only one Layer.

  • Highest candy gloss levels of the professional line

Add an additional day for professional coating installations.

At a minimum Level 3 detailing must be completed before the application of any professional level GYEON coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Surviving on the most intensely used windscreen for up to 12 months, at the same time ensuring an undiminished water repellency. Q2 View repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.

  • Improved visibility in inclement weather
  • Provides increased resistance to water spotting
  • Reduce wiper usage

1-3hrs

Q2 Trim has a formula that allows it to be applied on different vehicle parts: on plastics with their structure, on unpainted parts, on so-called piano black finishes, which are most problematic to maintain, on the tail- and headlight covers after having them restored. Its pure SiO2 base. It does not leave an oily layer on the trim’s surface but strongly bonds with its structure, leaving a thick coat. Q2 Trim provides a strong, long-lasting restoration effect.

  • Restorative effect for discolored/faded/oxidized black plastic trim
  • Prevents new plastics from lightening due to sun damage or natural oxidation.
  • UV protectant to prevent further oxidation

Contact us for a quote.

There are various wheel rim types available on the market, e.g., wet painted, powder-coated, anodized, or polished. Q2 Rim is an appropriate product to protect every one of them. Even the owners of models with polished rim lips have observed that the need to refresh the so-called mirror effect is significantly less frequent. Wheels, just after the engine bay and exhausts, are the components most exposed to high temperatures. Q2 Rim has an endurance capability exceeding 1400F without any damage to its original properties. The fact that this quartz coating is dedicated exclusively to rims is an asset and introduces a new level of quality within the field of rim protection.

  • Reduced cleaning needed
  • Brake dust both standard Iron and Carbon ceramic resistant
  • Withstands 1400F temperatures with no effect on longevity

Wheels off coating service-we remove, decontaminate, polish if needed your wheels before installing two layers of Gyeon RIM ensuring less work to keep them clean. Additionally, for factory satin black wheels such as Porsche GT cars, this coating greatly reduces the stainability of these finishes. While we have your wheel removed, we also coat Brake calipers and Rotor hats where applicable.

4/hrs

The first fully functional textile protectant containing SiO2.
Q2 Fabric Coat helps keep these surfaces cleaner for longer and also makes them much easier to clean. This coating is superhydrophobic, ‘throwing’ water and liquids off fabric and textiles–even for fabric convertible roofs, a high-pressure rinse once a month can be enough to keep the fabric clean and looking great.

This is typically done after a detailing session, but before the commencement of any Paint correction/Texture leveling/PPF as the entire car gets masked off to ensure this coating doesn’t go anywhere, we don’t want it to go.

 

1-2 days

Gyeon Auxiliary Interior Ceramic coatings

Highly advanced ceramic coating for all types of leather upholstery. Advanced quartz coating specially formulated for automotive leather. Q2 Leather Shield is suitable for every type of leather produced to date and does not change the finish of your upholstery. Repels dirt and prevents discoloration, protects against liquids, and UV rays. It provides superb protection against dirt, UV rays, and the rigors of everyday usage. Q2 Leather Shield makes the daily maintenance easy and safe even on delicate upholsteries.

  • Recommended for new leather surfaces
  • Maximum resistance to staining for light-colored leathers
  • Minimizes maintenance required for leather surfaces
  • Most Hydrophobic coating available for leather surfaces
  • 18-month protection

 

At a minimum Level 3 interior detailing must be completed before the application of GYEON
Q2 Leather shield on anything but new vehicles.

Versatile automotive leather protectant. A resin-based formula may be used on all types of automotive leather and presents the right solution on older, worn-out upholsteries, where the use of Q2 Leather Shield is not recommended. With a durability of up to 3 months, effective protection and dirt repellency exceeds standards set by any regular leather conditioner, protecting the surface from liquids, sweat, dirt or “dye transfer” from clothing.

  • 3 months of protection
  • Helps repel blue jean dye transfer
  • Safe for older worn leathers

 

At a minimum Level 2 interior detailing must be completed before the application of GYEON Q2 Leather coat on anything but new vehicles.

  • Q

    What is a Ceramic coating?

    A

    Ceramic coatings are not sealants, waxes, or polishes. They are highly advanced products that rely on primarily Quartz or Silicon to provide their hardness, durability, stain resistance, hydrophobicity. These coatings typically last years as opposed to waxes and sealants that last months.

  • Q

    Why Gyeon coatings?

    A

    After years of being disappointed in the performance of various ceramic coatings, we discovered GYEON. They don’t resort to silly marketing gimmicks or false promises. We found this refreshing as every other manufacturer in the industry pushed forever (warranties), displaying gimmicky images of hockey players clearly photoshopped onto the roofs of exotic cars. Honesty surrounding the capabilities of their product line and a great support structure for their Authorized Installers makes GYEON our go-to manufacturer for Ceramic Coatings as well as many other care products. Gyeon stands behind their products in a way manufactures rarely do.

    All Gyeon Exterior coatings except for Q2 Fabric are safe for Carbon Fiber application.

Exterior Coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 MOHS+

Q2 Mohs+ is a unique 2-stage coating system that provides both extreme scratch resistance and self-cleaning properties. With a pure Silazane base coat, it is the hardest automotive coating ever developed. The topcoat prevents watermarks and stains and prolongs the total durability of the Q2 Base coating. The result cannot be overestimated – using safe maintenance procedures paint correction may be avoided throughout the lifetime of the product.

  • Extreme scratch resistance
  • Extreme resistance to staining and water spotting
  • Crisp clear gloss
  • The original
  • 5-year warranty

Q2 Duraflex

Q2 DuraFlex is an advanced, two-ingredient, and double-layer ceramic coating. The pure silazane Q2 Base coating is the hardest automotive coating ever developed. It is a technological breakthrough and requires only one layer. Q2 Flexi is a thick and extremely slick topcoat that has set new standards in gloss, hydrophobicity, and durable self-cleaning.

  • Most hydrophobicity of any coating.
  • Superslick wax-like topcoat
  • 5-year warranty

DuraBead Q2

DuraBead is an advanced, two-ingredient, and multi-layer ceramic coating. You are using multiple layers of Q2 Mohs as the base coat topped with an extremely hydrophobic, fluorine-based top coat Q2 Bead results in industry-leading hydrophobicity, self-cleaning, and unrivaled durability.

  • Highest self-cleaning properties
  • Displays water beading characteristics similar to high-end legacy wax’s
  • 5-year warranty

GlasWerks Certified detailer coating offerings are baked into your vehicle’s paintwork with short wave IR bake lights.

Installation takes an additional 2 days for Certified coatings.

At a minimum Level 4 detailing must be completed before the application of any Certified detailer GYEON coatings

Professional level Coatings from GlasWerks and Gyeon

Q2 SYNCRO

Q2 Syncro is the most advanced widely available coating offered by Gyeon. Its multilayer application ends with the application of Q2 Skin, an advanced silicone-based topcoat that provides exceptional slickness and unrivaled hydrophobicity.

  • Superslick, Superhydrophobic, super glossy

Q2 MOHS

Q2 MOHS makes the paintwork extremely resistant to scratches. The extraordinary hardness and structural integrity of the coating preserve the effects achieved during the paint correction and are synonymous with much slower paint degradation during daily maintenance routine.

  • Dependable, long-lasting, durable Coating

Q2 MATTE

Unique quartz coating for matte paint. Only one layer is required. It is extremely hydrophobic and designed for maximum durability on matte finish automotive paint. Prevents discoloration and oxidation, protects against strong chemicals, road salt, and UV rays. Q2 Matte can also be applied over Satin or Matte-finished Vinyl wraps.

  • For Matte Paintwork

Q2 PURE

Q2 Pure brings the appearance of the paintwork to a new level, delivering pure candy gloss. Its thick formulation requires only one Layer.

  • Highest candy gloss levels of the professional line

Add an additional day for professional coating installations.

At a minimum Level 3 detailing must be completed before the application of any professional level GYEON coatings

Exterior Auxiliary Coatings

Certified Detailer only offerings from GlasWerks & Gyeon

Q2 VIEW-GLASS

Surviving on the most intensely used windscreen for up to 12 months, at the same time ensuring an undiminished water repellency. Q2 View repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.

  • Improved visibility in inclement weather
  • Provides increased resistance to water spotting
  • Reduce wiper usage

1-3hrs

Q2 TRIM-Black plastic trim/grills/plastic wheel liners

Q2 Trim has a formula that allows it to be applied on different vehicle parts: on plastics with their structure, on unpainted parts, on so-called piano black finishes, which are most problematic to maintain, on the tail- and headlight covers after having them restored. Its pure SiO2 base. It does not leave an oily layer on the trim’s surface but strongly bonds with its structure, leaving a thick coat. Q2 Trim provides a strong, long-lasting restoration effect.

  • Restorative effect for discolored/faded/oxidized black plastic trim
  • Prevents new plastics from lightening due to sun damage or natural oxidation.
  • UV protectant to prevent further oxidation

Contact us for a quote.

Q2 RIM-Wheels & High temp surfaces

There are various wheel rim types available on the market, e.g., wet painted, powder-coated, anodized, or polished. Q2 Rim is an appropriate product to protect every one of them. Even the owners of models with polished rim lips have observed that the need to refresh the so-called mirror effect is significantly less frequent. Wheels, just after the engine bay and exhausts, are the components most exposed to high temperatures. Q2 Rim has an endurance capability exceeding 1400F without any damage to its original properties. The fact that this quartz coating is dedicated exclusively to rims is an asset and introduces a new level of quality within the field of rim protection.

  • Reduced cleaning needed
  • Brake dust both standard Iron and Carbon ceramic resistant
  • Withstands 1400F temperatures with no effect on longevity

Wheels off coating service-we remove, decontaminate, polish if needed your wheels before installing two layers of Gyeon RIM ensuring less work to keep them clean. Additionally, for factory satin black wheels such as Porsche GT cars, this coating greatly reduces the stainability of these finishes. While we have your wheel removed, we also coat Brake calipers and Rotor hats where applicable.

4/hrs

Q2 FABRIC COAT- For fabric convertible or Targa roofs.

The first fully functional textile protectant containing SiO2.
Q2 Fabric Coat helps keep these surfaces cleaner for longer and also makes them much easier to clean. This coating is superhydrophobic, ‘throwing’ water and liquids off fabric and textiles–even for fabric convertible roofs, a high-pressure rinse once a month can be enough to keep the fabric clean and looking great.

This is typically done after a detailing session, but before the commencement of any Paint correction/Texture leveling/PPF as the entire car gets masked off to ensure this coating doesn’t go anywhere, we don’t want it to go.

 

1-2 days

Interior Coatings

Gyeon Auxiliary Interior Ceramic coatings

Q2 Leather shield

Highly advanced ceramic coating for all types of leather upholstery. Advanced quartz coating specially formulated for automotive leather. Q2 Leather Shield is suitable for every type of leather produced to date and does not change the finish of your upholstery. Repels dirt and prevents discoloration, protects against liquids, and UV rays. It provides superb protection against dirt, UV rays, and the rigors of everyday usage. Q2 Leather Shield makes the daily maintenance easy and safe even on delicate upholsteries.

  • Recommended for new leather surfaces
  • Maximum resistance to staining for light-colored leathers
  • Minimizes maintenance required for leather surfaces
  • Most Hydrophobic coating available for leather surfaces
  • 18-month protection

 

At a minimum Level 3 interior detailing must be completed before the application of GYEON
Q2 Leather shield on anything but new vehicles.

Q2 Leather coat

Versatile automotive leather protectant. A resin-based formula may be used on all types of automotive leather and presents the right solution on older, worn-out upholsteries, where the use of Q2 Leather Shield is not recommended. With a durability of up to 3 months, effective protection and dirt repellency exceeds standards set by any regular leather conditioner, protecting the surface from liquids, sweat, dirt or “dye transfer” from clothing.

  • 3 months of protection
  • Helps repel blue jean dye transfer
  • Safe for older worn leathers

 

At a minimum Level 2 interior detailing must be completed before the application of GYEON Q2 Leather coat on anything but new vehicles.

WINDOW TINT

Heat Rejection Film

Recently window tint has seen a transition from a low tech
privacy product to a high technology UV blocking asset protection
product. If you care about your car’s interior and want to remain
cool in the warmer months without having to blast your AC then
the modern films from STEK are a good fit for your lifestyle.

What we offer

At GlasWerks we offer the ACTION series of carbon ceramic window tint films from STEK. Available in shades from 05-80 they all offer the following benefits.

  • Carbon ceramic technology
  • Color stable (never fades or turns purple)
  • 99% UV blockage reducing Infrared heat pass through
  • Zero interference with radio or satellite signals
  • Limited lifetime warranty against fading, delamination, bubbling & cracking

WINDSHIELD ARMOR

COMING SOON

get a professional consultation

Request a Quote